Thecus-technology i Series Bedienungsanleitung Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 91
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
Step 1: Select “Quick install” then choose the RAID level to set. Please refer to
Figure 3.3.1. After choosing the RAID level, click “ ”, which
links to another page, user can set up “LUN” here.
Figure 3.3.1
Step 2: Please select a LUN number. Access control of host would show as a
wildcard “*”, which means every host can access this volume. In this page, the
“Volume size” can be changed. The maximum volume size is shown. To re-enter
the size be sure it has to be less or equal to maximum volume size. Then click
”.
Step 3: Confirm page. Click ” if all setups are correct. Then
a page with the “User data volume” just been created will be shown as Figure
3.3.2.
Done. You can start to use the system now.
Figure 3.3.2
(Figure 3.3.2: A RAID 0 user data volume with the UDV name “QUICK98273”, named by the
system itself, with the total available volume size 222GB.)
- 18 -
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 90 91

Kommentare zu diesen Handbüchern

Keine Kommentare